You have the choice of ordering either a standard iron-on faux leather label (as is) OR a customized iron-on faux leather label (*understood in advance via [email protected]), in order to test its iron-on properties and see if it meets your needs, products and fabrics.
Iron-on faux leather sample
From 2,50$
Want to test iron-on labels? Here's your chance to order either a standard label or a custom label* to test it on your fabrics and see if it suits your needs.
You have the choice of ordering either a standard iron-on faux leather label (as is) OR a customized iron-on faux leather label (*understood in advance via [email protected]), in order to test its iron-on properties and see if it meets your needs, products and fabrics.
Manufacturer's recommendations:
1- Press setting 270°/medium pressure and 10-12 seconds.
2-Protect the surface with a thermo film
3-Heat the material where the label will be installed (press for 5 seconds to remove all traces of moisture)
4- Press label into position according to preset settings
5- Turn the material over and press on the reverse side for a further 10-12 seconds.
6- While the faux leather is still warm to the touch, test a corner. If the corner lifts, reapply the film and reheat for a few more seconds.
*It's important to remember that not all fabrics interact in the same way, and that time and temperature must be adjusted accordingly. It's essential to do your own tests to find the right settings for your press and your products.